[Set] Intense Boost A Hydrating + B1 Luminous + B2 Nourishing
[Set] Intense Boost A Hydrating + B1 Luminous + B2 Nourishing
Unavailable
Clinical Results
Clinically tested under strict evaluation criteria, the use of Intense Boost A Hydrating with either B1 Luminous or B2 Nourishing:
A visible reduction in the appearance of surface pigmentation by up to 134.93%
An improvement in overall skin tone brightness by up to 105.88%
A visible improvement in the appearance of fine lines around the eyes by up to 127.47%
A noticeable firming effect in the cheeks, with up to 109.29% improvement in facial contour lift
And dermatologically tested and confirmed as non-irritating in a primary skin irritation study (0.00 irritation score)
* Based on human application test results. Individual results may vary.
HOW TO USE
1. Pour Part A into the mixing bowl up to the 50ml mark.
Add 2 to 3 pumps (about 5g) of Part B depending on the desired effect.
Keep the ratio at 10 to 1, Part A to Part B.
2. Gently mix in one direction until smooth.
Using a spatula, apply within 2 minutes starting from the inner cheeks then sweeping across the forehead, nose and chin.
3. Leave on for 20 to 30 minutes, then gently lift off starting from the bottom.
4. Lightly pat in any remaining essence, then follow with your favorite serum or cream.
INGREDIENTS
Key Ingredients:
Low Molecular Hyaluronic Acid: 1.4 MDa HA to help hydrate skin
Arukah 2: 4-in-1 complex to help calm the skin
- Madecassoside
- Madecassic Acid
- Asiaticoside
- Asiatic AcidNiacinamide: Helps improve skin tone and radiance
Kakadu Plum Extract: A vitamin C-rich extract that supports skin brightness
Adenosine: Helps smooth the skin and supports a healthy, elastic appearance.
Red Propolis Extract: Refreshes the skin’s appearance and helps reinforce the moisture barrier.
Purified Water, Glycerin, Algin, PEG-75, 1,2-Hexanediol, Butylene Glycol, Tetrasodium Pyrophosphate, Cellulose Gum, Chlorphenesin, Allantoin, Titanium Dioxide, Disodium EDTA, Oleth-10, Polysorbate 60, Glycyrrhiza Glabra (Licorice) Root Extract, Zingiber Officinale (Ginger) Root Extract, Schisandra Chinensis Fruit Extract, Phellodendron Amurense Bark Extract, Camellia Sinensis Leaf Extract, Aluminum Hydroxide, Propylene Glycol, Centella Asiatica Extract, Triethoxycaprylylsilane, Methyl Methacrylate Crosspolymer, Simethicone, Caprylyl Glycol, Sodium Hyaluronate, Asiaticoside, Asiatic Acid, Madecassic Acid, Madecassoside, Hydroxypropyltrimonium Hyaluronate, Sodium Acetylated Hyaluronate, Hydrolyzed Hyaluronic Acid, Hydrolyzed Hyaluronic Acid Crosspolymer, Hydrolyzed Sodium Hyaluronate, Potassium Hyaluronate
Full Ingredients (B1 Luminous):
Purified Water, Calcium Sulfate, Glycerin, Polysorbate 80, 1,2-Hexanediol, Macadamia Seed Oil, Canola Oil, Borage Seed Oil, Glucose, Cellulose Gum, Hydroxyethylcellulose, Chlorphenesin, Niacinamide, Allantoin, Limonene, Yellow Iron Oxide, Lemon Peel Oil, Citral, Ethylhexylglycerin, Camu Camu Fruit Extract
Full Ingredients (B2 Nourishing):
Purified Water, Calcium Sulfate, Glycerin, Polysorbate 80, 1,2-Hexanediol, Macadamia Seed Oil, Canola Oil, Borage Seed Oil, Glucose, Cellulose Gum, Hydroxyethylcellulose, Chlorphenesin, Allantoin, Propolis Extract, Fragrance, Adenosine, Mica, Red Iron Oxide, Black Iron Oxide, Linalool, Ethylhexylglycerin
FAQ
Q. Is it safe to use on sensitive skin?
A. The formula has been tested for low irritation and is developed for use on sensitive skin. However, individual reactions may vary.
It is not recommended for individuals with severe atopic dermatitis or damaged skin.
Q. Modeling pack doesn’t dispense from the pump.
A. Initially, air may not have been transferred. It may take at least five pumps after opening before it dispenses. After that, it can be used normally.
Q. How often should it be used weekly?
A. It is recommended to use it 2–3 times a week, leaving a two-day gap in between.
Q. The pack doesn’t seem to harden.
A. Due to the cream and essence-based formula, it has a softer texture compared to powder modeling packs. It begins to harden after about 7–30 seconds of mixing.
Q. Do I need to cleanse my face after removing the modeling pack?
A. No, after removing the dried mask, pat in the remaining essence for absorption.
Q. Do I have to use Part A and Part B together?
A. Yes, this product cannot be mixed with water.
Use the Modeling Base Part A and the Modeling Cream Part B together.
Customer Reviews
💖 What I loved
Creamy, no powder mess at all!
Just mix step 1 and 2 and you’re done, so easy.
Loaded with good stuff from ampoules.
Different options for your skin type.
I put it on after being outside and my red skin calmed down so fast.
And even after peeling it off, my skin stayed super soft and hydrated. Loved it! 💕
This modeling pack is so easy to use, no powder mess at all. Perfect if you’re new to this.
I tried the one for elasticity and dryness and loved that it dries like slime with no flakes left behind. It peels off moist and gentle, no irritation.
The cooling feeling is great and honestly I don’t want to use any other modeling pack now. My skin feels super hydrated and nourished.
Cleanup is a breeze, so if you hate the usual mess, you gotta try this. Totally recommend it!
This pack has niacinamide and Amazon berries to brighten and even out skin tone.
It’s proven to reduce spots by almost 35% and brighten skin after just 4 uses — so I really trust it!
The cooling feeling is perfect when my skin feels dull. If you’re always trying different packs, give Oable a shot!
I’ve never used a modeling pack that didn’t need powder, and honestly, I loved it. No stress about getting the water ratio right, and it stayed smooth the whole time I was applying it.
It didn’t drip either, which was a nice surprise. The cooling effect lasted a while, and I definitely noticed my skin looking brighter.
Whenever my skin feels dull, this makes it look fresh and clear, like a vitamin boost. I’ll definitely repurchase once I run out.
The best and most convenient part of this product is that it’s a cream modeling pack, not a powder type, so there’s no powder mess and no need for water. I’ve always known how effective modeling packs are, but I avoided using them because of the hassle of powder scattering and the cleanup afterward. However, the Oable modeling pack is different—it’s so much better. Sometimes, even fetching water for a pack feels like a chore, and I’ve often struggled to get the right water-to-powder ratio, leading to failed consistency. But with the Oable modeling pack, there’s no need for water, so you can use it immediately on the spot, making it incredibly useful for a busy lifestyle. All you need to do is mix 50ml of Part A with three pumps of Part B, saving time and eliminating the need for measuring. The scent of Part B, a refreshing mix of vitamins and lemon, perfectly matches its whitening function, making it enjoyable to use. Removing the pack is also super convenient—it peels off smoothly and easily. Unlike powder modeling packs that often leave residue on the skin requiring a skin pad to wipe clean, this one leaves minimal or no residue at all, making it exceptionally convenient.