[Set] Intense Boost A Hydrating + B1 Luminous
[Set] Intense Boost A Hydrating + B1 Luminous
Unavailable
Clinical Results
Clinically tested under strict evaluation criteria, the combined use of Intense Boost A Hydrating and B1 Luminous demonstrated:
A visible reduction in the appearance of surface pigmentation by up to 134.93%
An improvement in overall skin tone brightness by up to 105.88%
And dermatologically tested and confirmed as non-irritating in a primary skin irritation study (0.00 irritation score)
* Based on human application test results. Individual results may vary.
HOW TO USE
1. Pour Part A into the mixing bowl up to the 50ml mark.
Add 2 to 3 pumps (about 5g) of Part B depending on the desired effect.
Keep the ratio at 10 to 1, Part A to Part B.
2. Gently mix in one direction until smooth.
Using a spatula, apply within 2 minutes starting from the inner cheeks then sweeping across the forehead, nose and chin.
3. Leave on for 20 to 30 minutes, then gently lift off starting from the bottom.
4. Lightly pat in any remaining essence, then follow with your favorite serum or cream.
INGREDIENTS
Key Ingredients:
Low Molecular Hyaluronic Acid: 1.4 MDa HA to help hydrate skin
Arukah 2: 4-in-1 complex to help calm the skin
- Madecassoside
- Madecassic Acid
- Asiaticoside
- Asiatic AcidNiacinamide: Helps improve skin tone and radiance
Kakadu Plum Extract: A vitamin C-rich extract that supports skin brightness
Purified Water, Glycerin, Algin, PEG-75, 1,2-Hexanediol, Butylene Glycol, Tetrasodium Pyrophosphate, Cellulose Gum, Chlorphenesin, Allantoin, Titanium Dioxide, Disodium EDTA, Oleth-10, Polysorbate 60, Glycyrrhiza Glabra (Licorice) Root Extract, Zingiber Officinale (Ginger) Root Extract, Schisandra Chinensis Fruit Extract, Phellodendron Amurense Bark Extract, Camellia Sinensis Leaf Extract, Aluminum Hydroxide, Propylene Glycol, Centella Asiatica Extract, Triethoxycaprylylsilane, Methyl Methacrylate Crosspolymer, Simethicone, Caprylyl Glycol, Sodium Hyaluronate, Asiaticoside, Asiatic Acid, Madecassic Acid, Madecassoside, Hydroxypropyltrimonium Hyaluronate, Sodium Acetylated Hyaluronate, Hydrolyzed Hyaluronic Acid, Hydrolyzed Hyaluronic Acid Crosspolymer, Hydrolyzed Sodium Hyaluronate, Potassium Hyaluronate
Full Ingredients (B1 Luminous):
Purified Water, Calcium Sulfate, Glycerin, Polysorbate 80, 1,2-Hexanediol, Macadamia Seed Oil, Canola Oil, Borage Seed Oil, Glucose, Cellulose Gum, Hydroxyethylcellulose, Chlorphenesin, Niacinamide, Allantoin, Limonene, Yellow Iron Oxide, Lemon Peel Oil, Citral, Ethylhexylglycerin, Camu Camu Fruit Extract
FAQ
Q. Is it safe to use on sensitive skin?
A. The formula has been tested for low irritation and is developed for use on sensitive skin. However, individual reactions may vary.
It is not recommended for individuals with severe atopic dermatitis or damaged skin.
Q. Modeling pack doesn’t dispense from the pump.
A. Initially, air may not have been transferred. It may take at least five pumps after opening before it dispenses. After that, it can be used normally.
Q. How often should it be used weekly?
A. It is recommended to use it 2–3 times a week, leaving a two-day gap in between.
Q. The pack doesn’t seem to harden.
A. Due to the cream and essence-based formula, it has a softer texture compared to powder modeling packs. It begins to harden after about 7–30 seconds of mixing.
Q. Do I need to cleanse my face after removing the modeling pack?
A. No, after removing the dried mask, pat in the remaining essence for absorption.
Q. Do I have to use Part A and Part B together?
A. Yes, this product cannot be mixed with water.
Use the Modeling Base Part A and the Modeling Cream Part B together.
Customer Reviews
Oable Intense Boost Cream Modeling Pack sucks up heat and helps clear out oil and dead skin.
After using it, my skin felt super hydrated and looked brighter.
It keeps moisture in, blocks irritation, and gives your skin what it needs to stay healthy.
This leaves my skin super hydrated and firm!
When you peel it off, it just comes right off—no need to wipe or wash immediately. Just pull with your hands and it slides off easy.
This is definitely my new go-to for fresh skin.
The best and most convenient part of this product is that it’s a cream modeling pack, not a powder type, so there’s no powder mess and no need for water. I’ve always known how effective modeling packs are, but I avoided using them because of the hassle of powder scattering and the cleanup afterward. However, the Oable modeling pack is different—it’s so much better. Sometimes, even fetching water for a pack feels like a chore, and I’ve often struggled to get the right water-to-powder ratio, leading to failed consistency. But with the Oable modeling pack, there’s no need for water, so you can use it immediately on the spot, making it incredibly useful for a busy lifestyle. All you need to do is mix 50ml of Part A with three pumps of Part B, saving time and eliminating the need for measuring. The scent of Part B, a refreshing mix of vitamins and lemon, perfectly matches its whitening function, making it enjoyable to use. Removing the pack is also super convenient—it peels off smoothly and easily. Unlike powder modeling packs that often leave residue on the skin requiring a skin pad to wipe clean, this one leaves minimal or no residue at all, making it exceptionally convenient.